SMC/WD

SMC aquired Western Digital's network cards. So a WD8003 corresponds to a Elite 16 8003.

17 May 00- After a request for help on drivers for a smc 3016, I found they moved all of this stuff to a "legacy" subdirectory, PLUS they "HID" the file location behind some JS stuff. I can't get a direct link to the files. Any attempts to get directly to the files results in an error telling you to use your email as a login. No idea where the directory is.

 Legacy Driver location

WinNT 4.0 internal drivers exist for the SMC (WD) 8003E, 8003W, 8013EP, 8013WP



WD8003 Ethernet
ETHER.EXE 8003 Drivers, utils
8003wt-USG.pdf 8003 User's Guide

@6FC0.ADF - WD EtherCard PLUS/A (WD8003E/A or WD8003ET/A)
@6FC1.ADF - WD StarCard PLUS/A (WD8003ST/A) 
@6FC2.ADF - WD EtherCard PLUS 10T/A (WD8003W/A)



Elite 16 8013(/A) Ethernet
8013-UGD.pdf 8013(/A) User's Guide
ETHER.EXE 8013 Drivers and utils
gsm101.exe   SMC SCO AHS 5.1 NETWORK DRIVERS
gsu124.exe   SMC SCO LLI 3.4 DRIVER
guw402.exe   SMC UNIXWARE 2.x Driver
smc-ultra.c    SMC Ultra ethernet driver for linux


TokenCard Elite/A (8115T/A)

AdapterId 06EC6 SMC TokenCard Elite/A (8115T/A)

Adapter I/O Space
   This selects the I/O Base Address of the adapter. The adapter requires a space of 32 bytes (20h) beginning at the Base Address
   <I/O Base 0800h>, I/O Base 2800h, I/O Base 3800h, I/O Base 4800h, I/O Base 5800h, I/O Base 6800h, I/O Base 7800h, I/O Base 8800h, I/O Base 9800h, I/O Base A800h, I/O Base B800h, I/O Base C800h, I/O Base D800h, I/O Base E800h, I/O Base F800h

Shared RAM Base Address
   This selects the shared RAM Base Address of the adapter. The adapter requires a space of 16K bytes (4000h) beginning at the Base Address.
   <0C0000h, Size 16K>, 0C4000h, Size 16K, 0C8000h, Size 16K, 0CC000h, Size 16K, 0D0000h, Size 16K, 0D4000h, Size 16K, 0D8000h, Size 16K, 0DC000h, Size 16K, FC0000h, Size 16K, FC8000h, Size 16K, FD0000h, Size 16K, FD8000h, Size 16K

BIOS ROM Base Address
   This selects the Boot ROM Base Address. Select <Disabled> if a Boot  ROM is not installed. Select a Base Address if a Boot ROM is  installed. The Boot ROM requires a space of 16K bytes (4000h)  beginning at the Base Address
   <Disabled>, C0000h, C4000h, C8000h, CC000h, D0000h, D4000h, D8000h, DC000h

Boot ROM Protocol
   This selects which protocol the boot PROM will use
   <Netware>, RPL

Interrupt (IRQ) Level
   This selects the interrupt (IRQ) level for this adapter. The  adapter must have a unique interrupt level that is not shared with any other adapter
   <Level  3>, Level  4, Level 10, Level 15

Cable Type
   This selects the type of cable that is connected to the adapter
   <Shielded Twisted Pair>, Unshielded Twisted Pair

Adapter Operating Speed
  This selects the data rate at which the adapter will operate
   <4 Mbps>, 16 Mbps"

Early Token Release
   This selects whether the adapter supports Early Token Release
   <Disabled>, Enabled



8216 Ethernet
8216-DS.pdf   8216 Product Guide
8216-UGD.pdf  8216 User's Guide
ETHER.EXE
gsm101.exe  SMC SCO AHS 5.1 NETWORK DRIVERS
gsu124.exe   SMC SCO LLI 3.4 DRIVER
guw402.exe   SMC UNIXWARE 2.x Driver
smc-ultra.c   SMC Ultra ethernet driver for linux


3016MC and 3016TP/MC Ethernet

The 3016TP is illustrated. The 3016MC has a BNC connector in place of the RJ45 jack and it lacks the COL and LNK LEDs..

JP1 and T1 Cable select
JP2 Not installed

Selecting Cable Connector
   Jumper J1 and the pulse transformer T1 are used to select the cable type used
Board
Connector
Cable
J1
T1
3016TP/MC RJ45 Twisted Pair OUT IN
AUI Thick IN OUT
3016MC BNC Thin OUT IN
AUI Thick IN OUT

LEDs
TX
Transmit
RX
Receive
COL
Collision (3016TP only) 
LNK
Link integrity (3016TP only)

3016.exe   3016 Driver and utility disk
3016MC-UGD.pdf   3016 Users Guide

AdapterID 06016 SMC3016/MC

I/O Address Range
   Selects a 32 byte IO address range for the SMC3016/MC registers
  <0300-031F>, 0340-035F, 0360-037F, 1980-199F, 2000-201F, 5680-569F, 5900-591F

Boot PROM Address Range
   Selects an 8K byte memory address range for the Boot PROM. If there is no PROM installed, or you want to disable its operation, then select <PROM not used>
 <PROM not used>,0C2000-0C3FFF, 0C4000-0C5FFF, 0C6000-0C7FFF, 0C8000-0C9FFF, 0CA000-0CBFFF, 0CC000-0CDFFF, 0CE000-0CFFFF, 0D0000-0D1FFF, 0D2000-0D3FFF 0D4000-0D5FFF, 0D6000-0D7FFF, 0D8000-0D9FFF, 0DA000-0DBFFF, 0DC000-0DDFFF, 0DE000-0DFFFF

Interrupt Level Selection
    <IRQ3>, IRQ9 (IRQ2), IRQ10, IRQ11, IRQ15, IRQ5, IRQ4, IRQ12 
These options are currently not supported
   IRQ14, test only, IRQ7, IRQ6

NIC Main Page

9595 Main Page