Personal Pageprinter Adapter
@EFF6.adf   dgs file also needed  Per Page Ptr Adp/A Opt Dsk V.1.10 

Personal Pageprinter Adapter
   Base Card
   Daughter Card
4216-020 Printer Supplies
4216 Personal Pageprinter under W95
   Personal Pageprinter Software
   System and DOS Setup
   W95 Setup
ADF Section
   I/O Address

Personal Pageprinter Base Card P/N 67X6886
J1 18 pin header
J2 18 pin header
U1 Rockwell R65NC22 P2  11484-16
U3 Intel D2764A-2 P/N 75x8141
U4 Intel D2764A-2  P/N 75x8140
U7 ST 98947 MK4501N-15
U21 OKI M61523

Personal Pageprinter Daughter Card P/N 67X6885
J1 18 pin header
J2 18 pin header
U1 40.000 MHz Osc
U3 Motorola MC68000R10
U65 1888615
U66 67X6885
U46-U64   89X8920  memory chips

 Scans of the Personal Pageprinter Adapter /A was provided by Helmut P. Einfalt who found out how big my mailbox really is...

Personal Pageprinter Adapter - This adapter provides a 10 MHz M68000 coprocessor and program and page buffer storage that are designed  to provide page formatting and printer control for the 4216  Personal Pageprinter Model 020
o   Contains 0.5Mb program and 2.0Mb page buffer storage
o   Contains 16Kb EPROM including diagnostics and loader
o   Intended use is as a loadable PostScript(1) interpreter, page formatter and printer controller.

Additional features
    -   An alternate write to the page buffer storage that provides hardware assist for such functions such as data 'OR'ing, word rotate, and automatic clearing.
    -   FIFO and serializer logic to convert the page image in RAM to a video bit stream for transmission to the 4216 Model 020.
    -   An interface port between the M68000 and the Personal System/2.  The interface consists of a modified parallel printer adapter design.  This is the only communication between the Adapter and the Personal System/2 with no processor memory space being used by the adapter. This interface emulates the Personal System/2 printer port (i.e., LPT2) when an ASCII printer emulator is loaded and can be accessed by normal BIOS calls.  It also can be switched to an alternate (high-speed) mode that transfers data using a packet mode protocol.  The interface also allows  bi-directional data transfer.

Personal Pageprinter Adapter Licensed Program
   Version 1.3 seems to be the last version. 07F4349 is the 3.5" version.

4216-020 Personal Pageprinter
      The Personal Pageprinter is a compact, table top, page printer capable of printing up to 6 pages per minute. The special serial video interface allows the printer to be coupled with the host system, with a large portion of what is normally regarded as printer function residing in the IBM Personal Pageprinter Adapter.

Parts for the 4216-020
Fred Mau wrote this-
   Been trying to track down spares for the IBM 4216 Personal Pageprinter, which uses the once-common Ricoh 6000 engine, which was also OEM'ed to a lot of other brands.
   Tons of these machines out there, used and surplus, for dirt-cheap prices. Problem is, they're 10+ years old and almost all need new drums. Toner is easy, numerous places on the web sell toner cartridges, going rate is $25 to $30.
  So far, I've only found one place that sells new drums: Radio Shack, who once sold the re-badged Ricoh LP-1060V as a Tandy LP1000.  Called a friend at Radio Shack to verify availibility, he called their "Radio Shack Unlimited" special order warehouse, yes they are available, takes about a week to get it shipped to your door.

"LP Kit A", RSU # 10274884, Drum, cleaning unit, shield plate, shield plate cleaner, $199.99
"LP Kit B", RSU # 10274892, Same as the "A" kit except without Drum. $99.99
"LP 1000 Toner",  RSU #10456424,  $27.99

This stuff's listed on page 286 of their "2000 Answers" catalog.

4216 Trivia
   The "shutter problem" mentioned refers to the 4216 ... not the 4019. The 4216 Ricoh engine has a mechanical shutter between the upper laser beam exit and the lower photoconductor, that blocks the laser path when the unit is opened. There is only one switch (right front), which must be held down to test the printer with the cover open. The shutter prevents the dangerous infra-red laser beam from causing any damage during the test phase. The shutter is operated by a cheap plastic lever, which breaks when the people smash the printer cover shut like an engine hood.

4216 Printer under W95
The tortured hand-to-byte combat for the W95 stuff below was done by Helmut P. Einfalt

How to save money on PostScript printing by using the 4216 Personal Pageprinter and the Postscript Adapter /A!

***Why I did it***
   Running the 4216 Personal PagePrinter with  the appropriate PostScript Adapter /A (yeah, True Blue they are) under DOS and Win3.11 posed no problems whatsoever (with the obvious exception that it is advisable to have a few spares for the Pageprinter since some parts are rather flimsy).... But then the devil bit me and I wanted to take advantage of the increased amount of RAM I had plugged into the 9595-ALF (0LF beyond the pond, that is), so I ventured to set up the beast under Win95. And, folks, what a hell of a job it was!
   I presumed it simply HAD to work -- it is as DOS-based as the so-called Operating System is, so why shouldn't it work under Win95? First, I found out that the correct question should read: Why would it? After all, it's Micro%$&§*. Second, my raction was: If it can be done at all, it will be done.

Well, it took me seven hours, three installs, and tons of paper as well as almost a gallon of coffee...

* Hardware *
Before embarking on the adventure you might ask: Why use that old thing at all?

   Well, its cheap. The printer comes in for next to nothing (dumpster diving!), and toner cartridges are at some 10-12 EUR (or virtually the same in USD) over here. Since the printing engine is a Ricoh 6000, the toner cartridges for that one (and similar photocopiers etc) will work fine. There
are a lot of "clone cartridges" around that cost one third of what IBM asked for the toner last time I checked...

   The adapter, OTOH,  is more of a problem. Quite often the printers -- they used to be ubiquitous in corporate environments -- were scrapped simply for the one reason that the adapter ceased to work (bad case) or because they gave up MicroChannel altogether (good case). The adapter as such is a fat sandwich of two MCA cards (one populated with logic, the other with memory chips ) held together by multi-plug sockets on three sides and two dabs of hot-melt glue. If you can manage to get a couple of these adapters (ADF: @EFF6) you might just pluck the sandwiches apart and try different combinations -- out of three reportedly dead sandwiches, normally one pair should work... Most likely, the plastic foil on the back of the card will be missing -- it was nothing but a sheet of transparent plastic like they use for presentation folders -- easy to make, and easier still to cut your fingers with it (I know, I did...).

Personal Pageprinter Software
   You'll need the "PS/2 PostScript Adapter for IBM 4216 Diagnostics Diskette" (which is the standard "Option" disk and contains nothing but the ADF and DGF), as well as 9 (nine!) software disks:
-- the PostScript Adapter Program disks PPDISK1--PPDISK3
-- the Adobe Format Screen Fonts for the Personal Pageprinter PPASF1--PPASF3
-- the Windows Format Screen Fonts for the (etc.) PPWSF1--PPWSF3
   At least the option disk, the PPDisks and the PPASFs are a must. Even if you don't run Win3x, you're on the safer side if you have all ten of them ready -- IIRC the DOS-batchfile-controlled setup program is a bit finicky about what it wants.
   Can't remember having seen the whole pack at IBM's FTP, but if anyone needs them I can offer the German Version or (even better) maybe a plain-vanilla installed version ZIP with only the necessary files in their correct directories (anyone want to host it on their homepages?). I'd love to get the English version of the disks just for completeness...

With  that, you've got a True Blue machine with a True Blue Printer that does PostScript as long as you don't ask too much -- printing at a gentle pace, that's what it is. But then -- for only a few dollars....

System and DOS Setup
Set up the 4216 Adapter /A and Pageprinter combo under DOS as usual (if you've got it running Win3.11, the better).

First, check setup -- the card should be set to port *three* (dunny why, I found that Win95 choked on port 4 and decided there was no more LPT1 on the machine at all)... Ed. If you look at the adf, port 3 is at the standard 378-37B address. 

Second: Make sure that PPEPT.SYS is loaded in the Config.sys and that the other drivers are loaded via Autoexec.bat as stated below.

Make sure that you have a

-- <drive>:\PP;<drive>:\PSFONTS

statement in your path line, else you're in for a lot of surprises.

When you run memmaker under DOS (which is commendable in order to have enough memory under 640k for the first part of the installation process), answer "Yes" to the question whether EMS is used, else you're in for a system choke later on.

Since loading the adapter at every restart is kind of a bore, you might set up a DOS menu with

-- [menu]
-- menuitem=NoPRINTER
-- menuitem=PRINTER
-- menudefault=PRINTER,30

and add sections in config.sys and autoexec.bat accordingly.

In Config.sys you'll need a header
-- [Common]
under which you enter everything that will be in use for all configurations;

-- [Printer]
-- Loadhigh /L:x, nnnnnn <drive>:\pp\ppept.sys

and [NoPrinter] each heading in Config.sys, and some kindof

-- goto %config%
-- goto end
-- set PPDRV=C:\PP
-- set PPEM=P
-- LH /L:1,6432 C:\PP\PPTSR  [surprisingly, Loadhigh is accepted, address
varies obviously]
-- call c:\PP\ppstart /a /nt /l /np
-- goto end
-- :end

section in Autoexec.bat.

Parameters for PPSTART.BAT will depend on personal preferences (print test page yes/no etc.).

   It is important that the PPEPT1.SYS be loaded in every case (i.e. it should be in the [common] part, else Win95 will push it somewhere or nowhere...) While it was possible to start the whole Printer configuration and font loading process under DOS and Win3x at any time, with Win95 it is a must to load PPTSR *before* the Windows GUI comes up -- failing to do so I twide ended up with a nice Protection Error and the resulting BSOD...

W95 Setup
   When everything is done, install Win95. Don't care about the printer in the first place, simply try to get the program installed. Once it is up and running, you will want to add a printer. Procedure is standard, selection "IBM/Lexmark" and "Personal Pageprinter II-30". The Driver comes up without a hitch, and that's where your problems will begin. DON'T try to print a test page, as the program suggests -- it won't work.

  Once the printer is installed, go to the printer's "Properties" menu and do the following:
Details  use the "Add Port" button to create a new local port called "LPT1.DOS"  This is important, for unless the printer is hooked to that one (NOT the standard LPT1 !!!) every attempt to print will end with a "device not ready" error..

Spool settings
   Activate the spooler ("Start printing after las page is spooled")
      Enable bidirectional communication. 
      Optimized for PORTABILITY
      Check "Download header with each print job"
      Timeouts shoudl be set to job=0, and wait=240 or higher. 
   Fonts always use TrueType fonts, (or else!!)s -- don't let Win95 substitute fonts!
Close Printer Properties.

Create Shortcut to \pp\ppctl.exe
This is a pure DOS program, but the only one that allows you to monitor the printer and to adjust printer settings (the important ones -- the simple things are provided by Mciro"§$%).

Properties>Program>Advanced button 
   Set to "Prevent MS-DOS based programs from detecting Windows" -- NO
   Suggest MS-DOS mode as necessary!". PPCTL uses XMS -- so give it at least 1024.

Last step (and you've been rebooting quite a few times in the meanwhile):
Check that your printer mode (in ppctl) is set to:
-- emulated printer: Proprinter XL
-- standard interface mode: PostScript
-- mode over EPT: automatic
(or whatever the English exquivalents are).

   EPT is *not* used (nor is EPT.DOS) to hook up the printer -- but for sure EPT is used internally. Trying the former port always ended with something sending some data to the printer without ever any output (EPT seems to be an equivalent to >NUL), while the latter produced a flood of PostScript code in 100% Courier.... Actually, the data directed to LPT1.DOS is intercepted by the card and handed over to the printer in a piecemeal fashion.

As soon as I was there, I was not only close to a neervous breakdown, but also close to success...

   I added a "shared" statement and tried it from another machine across the network -- and voilà: it still worked.

   It works fine as long as you load the drivers when firing up the machine, and PPCTL is running in a little DOS-box under Win95 (creating a desktop shortcut with a nice icon is an good idea...)

Hope someone can do something with that info.... There is virtually nothing around about these cards, and what little info I have is German.......

Helmut P. Einfalt

AdapterID 0EFF6h Personal Pageprinter Adapter/A

Pageprinter Adapter I/O choices
   Port Four (037ch - 037fh), Port Two (027ch - 027fh), <Port Three (0378h - 037bh)>, Port One (0278h - 027bh)

9595 Main Page